Outback Sport F4-2.5L SOHC (2005)
1. Replace the black clip (1), (2) with a new one. Install the clip with arrow mark facing the front side of grille (A).
2. Replace the white clip (5) with a new one.
CAUTION: Do not use foam rubber washer with new white clips.
3. Insert the hood grille clip and engage the three clips.
CAUTION: Make sure that the anchor portion of each clip is firmly engaged.
4. Install the five nuts.
Tightening torque:
4.4 N.m (0.45 kgf-m, 3.25 ft-lb)
