Outback Sport F4-2.5L SOHC (2005)
-
Do not allow water or oil to come in contact with the connector terminals. Do not touch the connector terminals.
-
Either of the airbag modules for driver, passenger or side, or pretensioner must not be disassembled.
-
The removed front seat with the airbag module must be kept at least 200 mm (8 in) away from walls and other objects.
-
Do not use the airbag or pretensioner parts from other vehicles. Always replace defective parts with new parts.
-
Never reuse a deployed airbag or pretensioner.
-
When painting or performing sheet metal work on the front part of the vehicle, including the front wheel apron, front fender, and front side frame,
remove the front sub sensors and wire harness of the airbag system.
