Outback Sport F4-2.5L SOHC (2005)
5)
Remove the hinge spring by using a dip remover tool (see Figure 11 and 12).
6)
Install in reverse order of removal.
^
Install new hinge spring. Note: Make sure to wear safety glasses.
^
Replace the clips on the hinge cover with new ones supplied (make sure they are the same color). Install hinge cover.
^
Make sure seat belt is behind seat belt guide (see figure 13).
^
Install the backrest redine handle cover. Install new hinge spring cover.
7)
Check for proper operation of the seat: slides forward, rearward, reclines and locks into place.