Outback Sport F4-2.5L SOHC (2005)
Parking Brake Cable: Service and Repair
Parking Brake Cable
REMOVAL
1) Lift up the vehicle.
2) Remove the rear wheels.
3) Remove the rear seat cushion.
4) Remove the console box.
5) Loosen the parking cable adjusting nut and console bracket.
6) Remove the parking brake lever.
7) Roll up the floor mat and remove clamps.
8) Remove the equalizer cover.
9) Remove the inner cable end from equalizer.
10) Remove the parking brake cable from rear brake.
11) Remove the clamp from rear brake.
12) Remove the bolt and bracket from trailing link bracket.
13) Remove the bolt and clamp from rear floor.
