subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 1617 > < Diagram Information and Instructions|Page 1615
Page 3
background image

connector at a time from the circuit, starting with the one located farthest from power supply. If the test light goes out when a connector is
disconnected, the wiring between that connector and next connector (farther from the power supply) is shorted.

2. WITH OHMMETER:

Disconnect all affected connectors, and check the continuity between each connector and ground. When the ohmmeter indicates continuity
between a particular connector and a ground, that the connector is shorted.

Diagram Information and Instructions|Page 1617 > < Diagram Information and Instructions|Page 1615