Outback Sport F4-2.5L SOHC (2005)
ABS Light: Testing and Inspection
ABS Warning Light/Brake Warning Light Illumination Pattern
INSPECTION
1) When the ABS warning light does not illuminate in accordance with this illumination pattern, there must be an electrical malfunction.
2) When the ABS warning light remains constantly OFF, repair the ABS warning light circuit or diagnosis circuit.
NOTE: Even though the ABS warning light does not go out about 2 seconds after it illuminates, the ABS system operates normally when the
warning light goes out while driving at approximately 12 km/h (7 MPH). However, the Antilock brakes do not work while ABS warning light is
illuminated.
ABS WARNING LIGHT DOES NOT COME ON
DETECTING CONDITION:
^
Defective combination meter
^
Defective harness
TROUBLE SYMPTOM
When the ignition switch is turned to ON (engine OFF), ABS warning light does not come on.
