Outback Sport F4-2.5L SOHC (2005)
Oxygen Sensor: Service and Repair
Rear Oxygen Sensor
Rear Oxygen Sensor
REMOVAL
1. Disconnect the ground cable from battery.
2. Disconnect the connector of rear oxygen sensor.
NOTE: Remove the harness clip from bracket.
3. Lift up the vehicle.
4. Apply spray type lubricant to the threaded portion of rear oxygen sensor, and leave it for one minute or more.
5. Remove the rear oxygen sensor.
CAUTION: When removing the rear oxygen sensor, wait until the exhaust pipe cools, otherwise it will damage the exhaust pipe.
INSTALLATION
