subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fuel Filler Hose|Removal and Installation|Page 2396 > < Fuel Filler Hose|Removal and Installation|Page 2394
Page 5
background image

6. Insert the fuel filler hose (A) approximately 35 to 40 mm (1.38 to 1.57 in) over the lower end of fuel filler pipe and tighten the clamp.

7. Insert the evaporation hose (B) approximately 25 to 30 mm (0.98 to 1.18 in) into the lower end of evaporation pipe and hold the clip.

CAUTION:  Do not allow clips to touch evaporation hose (B) and rear suspension crossmember.

8. Tighten the bolt which holds the fuel filler pipe bracket on the body.

9. Secure the evaporation hose to clip of fuel filler pipe.

Fuel Filler Hose|Removal and Installation|Page 2396 > < Fuel Filler Hose|Removal and Installation|Page 2394