Outback Sport F4-2.5L SOHC (2005)
7. Unsolder connection between rectifier and stator coil to remove the stator coil.
CAUTION: Do not allow a 180 - 270 W soldering iron to contact the terminals for more than 5 seconds at once because the rectifier cannot
withstand so much heat.
8. Remove the IC regulator as follows.
1. Remove the screws which secure IC regulator to rear cover.
2. Unsolder the connection between IC regulator and rectifier to remove the IC regulator.
9. Remove the brush as follows.
1. Remove cover A.
