Outback Sport F4-2.5L SOHC (2005)
Power Steering Fluid Reservoir: Service and Repair
Reservoir Tank
REMOVAL
1. Remove the air intake duct.
2. Drain fluid from the reservoir tank.
3. Disconnect the pipe D from return hose and suction hose from oil pump.
CAUTION:
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
4. Remove the reservoir tank from bracket by pulling it upwards.
INSTALLATION
1. Install the reservoir tank to bracket.
2. Connect the pipes D to return hose and suction hose to oil pump.
3. Feed the power steering fluid to the specified level.
INSPECTION
Check the reservoir tank for cracks, breakage, or damage. If any cracks, breakage, or damage is found, replace the reservoir tank.