Outback Sport F4-2.5L SOHC (2005)
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
8. Install the pulley belt cover.
9. Connect the battery ground cable to battery.
10. Feed the specified power steering fluid.
CAUTION: Never start the engine before feeding the fluid; otherwise vane pump might be seized up.
INSPECTION
BASIC INSPECTION
Perform the following inspection procedures and repair or replace defective parts.
SERVICE LIMIT
Make a measurement as follows. If it exceeds the specified service limit, replace the parts with new ones.
CAUTION:
^
Fix the oil pump on a vise to make a measurement. At this time, hold the oil pump with least possible force between two wood pieces.
^
Do not set outside of flow control valve or pulley on a vise; otherwise outside or pulley might be deformed. Select properly sized wood pieces.