Outback Sport F4-2.5L SOHC (2005)
11. Remove the two bolts securing valve assembly.
12. Carefully draw out the input shaft, and then remove the valve assembly.
13. Using a sharp pointed pliers, rotate the rack stopper in direction of the arrow until end of the circlip comes out of stopper. Rotate the circlip in
opposite direction and pull it out.
14. Pull the rack assembly from cylinder side, and draw out the rack bushing and rack stopper together with the rack assembly.
CAUTION: Be careful not to contact the rack to inner wall of cylinder when drawing out. Any scratch on the cylinder inner wall will cause oil
leakage.
15. Remove the rack bushing and rack stopper from rack assembly.
16. Remove the oil seal from rack.