Outback Sport F4-2.5L SOHC (2005)
15. Using the ST, install the plug.
ST 34199AE090 PLUG WRENCH
Tightening torque: 64 Nm (6.5 kgf-m, 47.0 ft. lbs.)
16. Install the dust cover. Remove the vinyl tape.
17. Temporarily install the rack, and then operate it from lock to lock two or three times to make it fit in. Remove the grease blocking air vent hole.
CAUTION: If operating the rack from lock to lock without installing tie-rod, it may damage the oil seal. Always install the tie-rods LH and RH.