subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Shift Solenoid, A/T|Testing and Inspection|Page 2812 > < Shift Solenoid, A/T|Testing and Inspection
Page 1
background image

Shift Solenoid: Service and Repair

Shift Solenoids, Duty Solenoids and ATF Temperature Sensor 

REMOVAL 

SHIFT SOLENOIDS AND DUTY SOLENOIDS 

1. Lift-up the vehicle.
2. Clean the transmission exterior.
3. Replace the gasket with a new one, and tighten the drain plug.

4. Drain the ATF completely.

Tightening torque: 25 Nm (2.5 kgf-m, 18 ft. lbs.) 

5. Remove the oil pan. 

6. Disconnect the solenoid and duty solenoid connectors.

Shift Solenoid, A/T|Testing and Inspection|Page 2812 > < Shift Solenoid, A/T|Testing and Inspection