Outback Sport F4-2.5L SOHC (2005)
3) Move the cylinder boot backward.
4) Remove the stop ring.
CAUTION: Be careful when removing the snap ring to prevent the rod, washer, piston and return spring from flying out.
5) Remove the clutch damper. (Non-turbo model)
ASSEMBLY
1) Install the clutch damper. (Non-turbo model)
Tightening torque: 46.6 Nm (4.75 kgf-m, 34.4 ft. lbs.)
2) Apply a coat of grease to the contacting surfaces of the push rod and piston before installation.
Grease: SILICONE GREASE G40M (Part No. 004404003)
3) To assemble the master cylinder, reverse the sequence of disassembly procedure.
Tightening torque: 10 Nm (1.0 kgf-m, 7 ft. lbs.)
INSPECTION
