Outback Sport F4-2.5L SOHC (2005)
NOTE:
^
Take care to install the snap pin in proper direction.
^
Conduct the adjustment of reverse check cable before installation.
6. Install the rear exhaust pipe and muffler.
7. Install the under cover.
8. Install the boot plate.
NOTE: Install the inner boot without any twist.
Tightening torque: 7.5 Nm (0.76 kgf-m, 5.5 ft. lbs.)
9. Install the console box.
10. Check that the gear shift is correctly shifted to each gear.
DISASSEMBLY
5MT
1. Disassemble the lock wire.