Outback Sport F4-2.5L SOHC (2005)
NOTE:
^
Install the lock wire to the stay groove.
^
Bend the extra wire to same direction of lock wire winding.
11. Install the holder.
Tightening torque: 1.3 Nm (0.13 kgf-m, 0.96 ft. lbs.)
12. Insert the reverse check cable into boot hole.
13. Insert the reverse check cable into gear shift assembly, and fix with band clip.
NOTE:
^
Cut off the extra band clip.
^
Make sure that the reverse check cable is inserted into gear shift lever assembly without any clearance.