Outback Sport F4-2.5L SOHC (2005)
Transmission Speed Sensor: Service and Repair
Rear Vehicle Speed Sensor
Rear Vehicle Speed Sensor
REMOVAL
VTD MODEL
When removing the rear vehicle speed sensor, refer to Front Vehicle Speed Sensor.
MPT MODEL
1. Set the vehicle on a lift, and then lift-up the vehicle.
2. Disconnect the connector from rear vehicle speed sensor.
3. Remove the rear vehicle speed sensor.
INSTALLATION
VTD MODEL
When installing the rear vehicle speed sensor, refer to Front Vehicle Speed Sensor.
MPT MODEL
Install in the reverse order of removal.
NOTE: Replace with a new O-ring.
Tightening torque: 7 Nm (0.7 kgf-m, 5.1 ft. lbs.)
