subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Sensors and Switches - M/T > < Transmission Temperature Sensor/Switch, A/T|Service and Repair|Page 3607
Page 4
background image

5. Apply liquid gasket fully to three holes other than screw holes on transmission case. 

Liquid gasket: THREE BOND 1217B (Part No. K0877YA020)

6. Install the oil pan. 

Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.) 

7. Fill ATF up to the middle of the COLD side on level gauge by using the gauge hole. 
8. Check the ATF level.

ATF TEMPERATURE SENSOR 

For installation of ATF temperature sensor, refer to Front Vehicle Speed Sensor.

Sensors and Switches - M/T > < Transmission Temperature Sensor/Switch, A/T|Service and Repair|Page 3607