Outback VDC Wagon AWD F6-3.0L (2002)
Vehicle Speed Sensor: Service and Repair
A: REMOVAL
1. Extract the torque converter clutch assembly.
2. Disconnect the air breather hoses.
3. Disconnect transmission harness connector from stay.
NOTE: Lift-up lever behind connector and disconnect it from stay.
4. Disconnect inhibitor switch connector from stay.
5. Wrap vinyl tape around the nipple attached to the air breather hose.
6. Remove pitching stopper bracket.
7. Remove the oil charger pipe.
8. Remove the oil cooler pipes.
9. Insert a shop cloth into the installation holes of oil charger pipe and oil cooler pipe.
10. Remove rear vehicle speed sensor.
