Outback VDC Wagon AWD F6-3.0L (2002)
Impact Sensor: Service and Repair
Front Sub Sensor Harness
Front Sub Sensor Harness
REMOVAL
1. Turn ignition switch OFF.
2. Disconnect ground cable from battery, and wait for at least 20 seconds before starting work.
3. Remove instrument panel.
4. Disconnect front sub sensor connector (blue) from airbag main harness.
5. Remove front bumper.
6. Disconnect connector from front sub sensor.
7. Remove wiring harness clips.
8. Remove grommet, and then detach front sub sensor harness (A).