Outback VDC Wagon AWD F6-3.0L (2002)
15. Fit a new oil seal using ST.
ST 498447120 OIL SEAL INSTALLER
16. Install companion flange.
NOTE: Use a plastic hammer to install companion flange.
17. Tighten self-locking nut within the specified torque range so that the turning resistance of companion flange becomes the same as that before
replacing oil seal.
ST 498427200 FLANGE WRENCH
NOTE: Use a new self-locking nut.
Tightening torque: 181.4 Nm (18.50 kgf-cm, 133.8 ft. lbs.)
18. Reassembling procedure hereafter is the reverse of the disassembling.