Recall: Steering Wheel Looseness - May 1982 - Page 1369
NOTE:
On vehicles equipped with tilt steering, perform the following procedure with the steering wheel in the lowermost position.
(2)
Using a 17 mm deep socket and a torque wrench, slightly loosen and then retorque the steering wheel not to 29 ft.lbs. (4.0 kg-m). See Figure 2.
NOTE:
Be certain not to over tighten the steering wheel not as stripping of the threads may occur.
(3)
Reinstall Center Cap.
(4)
Complete the recall completion tag.
(5)
Install recall completion tag on driver's door post.
Towing Information
TO:
ALL DISTRIBUTOR SERVICE MANAGERS
FROM:
DAVID BAINES SOA WARRANTY DEPARTMENT
SUBJECT:
S.W.N. 23 - TOWING