SVX AWD L6-3.3L DOHC (1995)
Spark Plug: Service and Repair
REMOVAL
1.
Remove ignition coil.
Refer to Ignition Coil.
2.
While wearing safety glasses, use compressed air to blow out debris from plug well.
3.
Using a 5/8" (16mm) socket, remove the plug in CCW direction.
INSTALLATION
1.
Adjust electrode gap.
ELECTRODE CLEARANCE
0.039 - 0.043 in (1.0 - 1.1 mm)
2.
Lightly coat threads of plug with anti-seize compound.
3.
Install and thread plug into cylinder head by hand.
4.
Torque spark plug.
TORQUE VALUE
14 - 22 ftlb (20 - 29 Nm)
5.
Apply dielectric compound to the inside of ignition coil boot and install. A slight click will be heard when terminal is properly connected.
6.
Install ignition coil.
RECOMMENDED SPARK PLUGS
BRAND
PART NO.
---------------------------------
NGK
PFR6B-11
NIPPONDENSO PKR20PR-11
