SVX AWD L6-3.3L DOHC (1995)
8. Loosen bolts which secure tone wheel to hub. Remove tone wheel.
9. Using hub stand and a hydraulic press, drive hub bolts out. Be careful not to hammer hub bolts. This may deform hub.
INSPECTION
1. Check the removed parts for wear and damage. If defective, replace with a new one.
2. If a bearing is faulty, replace it as the bearing set.
3. Be sure to replace oil seal at every overhaul.
ASSEMBLE
1. Attach hub completely to hub stand securely.
2. Using a hydraulic press, press new hub bolts into place.
a. Use 12 mm (0.47 inch) dia. holes in HUB STAND to prevent bolts from tilting.
b. Be sure to press hub bolts until their seating surfaces contact the hub.
3. Remove foreign particles (dust, rust, etc.) from mating surfaces of hub and tone wheel, and install tone wheel to hub.
a. Ensure tone wheel closely contacts hub.
b. Be careful not to damage tone wheel teeth.
4. Clean dust or foreign particles from inside the housing.
