SVX LSi AWD L6-3.3L DOHC (1997)
Main Relay (Computer/Fuel System): Testing and Inspection
Main Relay Test
- Remove main relay.
- Using an ohm meter, check for continuity between terminals 1 and 2 of relay.
Continuity should exist.
- Check for continuity between terminals 3 and 4 when battery voltage is supplied between terminals 1 and 2.
Continuity should exist when voltage is supplied
- Check for continuity between terminals 5 and 6 when battery voltage is supplied between terminals 1 and 2.
Continuity should exist when voltage is supplied
