Tribeca F6-3.6L (2008)
4. Operate the brake tester.
5. Perform VDC sequence control.
6. When the hydraulic unit begins to work, check the following work sequence.
1. The FL wheel performs compression, hold and decompression in sequence, and subsequently the FR wheel repeats the cycle.
2. The RR wheel performs compression, hold and decompression in sequence, and subsequently the RL wheel repeats the cycle.
7. Read values indicated on the brake tester and check if the fluctuation of the values between decompression and compression meets specification.
8. After the inspection, depress the brake pedal and check that it is not abnormally hard, and tightness is normal.
