Tribeca F6-3.6L (2008)
6)
Wait and read the screens shown.
7)
At this point in the procedure the steering angle sensor data to the VDC/ABS Control Unit is evaluated. There are 3 possible results from this
evaluation:
A)
The steering wheel is perfectly straight.
B)
The steering wheel is off center a small degree.
C)
The steering wheel is off center a large degree.
This is the display when the steering wheel is off center a large degree.
This is the display when the steering wheel is off center a small degree.
In either case, the display will go back to the function check sequence after a few seconds.
