Tribeca F6-3.6L (2008)
Camshaft Gear/Sprocket: Service and Repair
Cam Sprocket
REMOVAL
NOTE: Perform the work with the engine installed to body when replacing a single part.
1) Remove the V-belt.
2) Remove the crank pulley.
3) Remove the chain cover.
4) Remove the timing chain assembly.
5) Remove the cam sprocket. To lock the camshaft, use the ST.
ST 499977500 CAM SPROCKET WRENCH
^
Intake side
^
Exhaust side
INSTALLATION
1) Install the cam sprocket. To lock the camshaft, use the ST.
Tightening torque: 29.5 N-m (3.0 kgf-m, 21.8 ft-lb)
2) Further tighten the bolt.
Tightening angle: 45° ± 5°
ST 499977500 CAM SPROCKET WRENCH
^
Intake side
^
Exhaust side