subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Sensors and Switches - Powertrain Management > < Main Relay (Computer/Fuel System)|Locations|Page 1454
Page 1
background image

Ignition Control Module: Service and Repair

Ignition Coil

REMOVAL

Direct ignition type has been adopted. Refer to "Spark Plug" for removal procedure.

INSTALLATION

Install in the reverse order of removal.

Tightening torque: 16 N.m (1.6 kgf.m, 11.7 ft.lb)

Sensors and Switches - Powertrain Management > < Main Relay (Computer/Fuel System)|Locations|Page 1454