Tribeca F6-3.6L (2008)
Oxygen Sensor: Service and Repair
Front Oxygen (A/F) Sensor
Front Oxygen (A/F) Sensor
REMOVAL
1. Set the vehicle on a lift.
2. Disconnect the ground cable from the battery.
3. Lift up the vehicle.
4. Disconnect the connector of front oxygen (A/F) sensor.
-
LH side
-
RH side
5. Apply spray-type lubricant to the threaded portion of front oxygen (A/F) sensor, and leave it for one minute or more.
6. Remove the front oxygen (A/F) sensor.
CAUTION: When removing the front oxygen (A/F) sensor, wait until exhaust pipe cools, otherwise it will damage the exhaust pipe.
-
LH side
-
RH side