Tribeca F6-3.6L (2008)
INSTALLATION
1. Before installing front oxygen (A/F) sensor, apply anti-seize compound only to the threaded portion of front oxygen (A/F) sensor to make the next
removal easier.
Anti-seize compound: NEVER-SEEZ NSN, JET LUBE SS-30 or equivalent
CAUTION: Never apply anti-seize compound to the protector of front oxygen (A/F) sensor.
2. Install the front oxygen (A/F) sensor.
Tightening torque: 21 N.m (2.1 kgf.m, 15.5 ft.lb)
-
LH side
-
RH side
3. Connect the connector of front oxygen (A/F) sensor.
-
LH side
-
RH side
