Tribeca F6-3.6L (2008)
35) Remove the detent check block.
Assembly
ASSEMBLY
1) Clean all the parts before assembly.
2) Apply NIGTIGHT LYW No. 2 grease or equivalent to each part.
3) Assemble in the reverse order of disassembly.
NOTE:
^
Refer to "COMPONENT" for each tightening torque. See: Diagrams
^
When pressing in the shift position pin, insert from the left side of the vehicle.
^
Affix the harness of the shift button switch and the mode change switch at the marked positions.
