Tribeca F6-3.6L (2008)
15) Cut off the band with an allowance of about 10 mm (0.39 in) left from the clip and bend this allowance over the clip.
CAUTION:
Make sure that the end of the band is in close contact with clip.
16) Extend and retract the PTJ to provide equal grease coating.
Front Drive Shaft Inspection
INSPECTION
Check the removed parts for damage, wear, corrosion etc. If faulty, repair or replace.
^
PTJ (pillow tripod joint)
Check for seizure, corrosion, damage, wear and excessive play.
^
EBJ (high-efficiency compact ball fixed joint)
Check for seizure, corrosion, damage and excessive play.
^
Shaft
Check for excessive bending, twisting, damage and wear.
^
Boot
Check for wear, warping, breakage and scratches.
^
Grease
Check for discoloration and fluidity.
Rear Drive Shaft Disassembly
DISASSEMBLY
1) Straighten the bent claw at the larger end of the DOJ boot.
2) Loosen the band by means of screwdriver or pliers.
CAUTION:
Be careful not to damage the boot.
