Tribeca F6-3.6L (2008)
Liftgate Window Glass: Service and Repair
REAR GATE GLASS
REMOVAL
1. Remove the rear wiper motor.
2. Disconnect the electrical connectors from rear defogger terminal.
3. Remove the glass in the same procedure as for windshield glass.
INSTALLATION
1. Mount the fastener on the body.
2. Cut off the cartridge nozzle tip as shown and set it in sealant gun.
3. Apply adhesive in the same procedure as for windshield glass.
4. Insert the glass clip pin into rear gate hole, push on the area around the clip pin to secure it, and then push lightly all around the area to seal it.
5. About one hour after installation, conduct a leak test.