Tribeca F6-3.6L (2008)
Wiper Blade: Removal and Replacement
Wiper Blade
REMOVAL
CAUTION:
When replacing the wiper blade, if standing up the wiper arm, be sure to stand up the driver's side wiper arm first, and then passenger's side
wiper arm next. Also, when putting the wiper arms back, be sure to start with passenger's side first, then driver's side next. Doing this in the
reverse order may result in the driver's side wiper blade hitting the passenger's side wiper arm and causing damage.
1. FRONT
While pushing the locking clip upward to the direction of the arrow, remove the blade from the arm by pulling to the direction of the arrow.
2. REAR
Turn the blade in the direction of arrow (A) and remove it from arm.
INSTALLATION
1. Install in the reverse order of removal.
2. Confirm that the clip is locked securely.
