Tribeca F6-3.6L (2008)
Wiper Motor: Service and Repair
Front Wiper Motor and Link
Front Wiper Motor And Link
REMOVAL
1. Disconnect the ground cable from the battery.
2. Remove the cowl panel.
3. Remove the bolt, and then remove the wiper assembly.
4. Disconnect the connector of wiper motor assembly.
NOTE: The wiper motor and wiper link is an assembly part and is not to be disassembled.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: N.m (kgf.m, ft.lb)
T1: 6.0 (0.61, 4.4)
T2: 20 (2.0, 14.5)
T3: 31 (2.0, 14.5)