Tribeca F6-3.6L (2008)
Wiper Motor: Testing and Inspection
Front Wiper Motor and Link
Front Wiper Motor And Link
INSPECTION
1. When the battery is connected to the terminal of connectors, confirm that the wiper motor operates at low speed.
2. When the battery is connected to the terminal of connectors, confirm that the wiper motor operates at high speed.
3. Connect the battery to the terminals to the connector, then run the wiper motor at low speed and disconnect the terminal in mid motion.
4. Connect the battery and confirm that the wiper motor stops at the automatic stop position after the wiper motor operates at low speed again.
