subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Modified Carburetor Needle Valve|Page 715 > < Modified Carburetor Needle Valve|Page 709
Page 1
background image

Technical Service Bulletin # 91482

Date: 820427

Modified Carburetor Needle Valve

Number: 9-14-92

Date 4-27-82

Applicability: 1982 Models Equipped With Hitachi Carburetors

Subject: Modified Carburetor Needle Valve

The needle valve and choke chamber (carburetor top) of the Hitachi Carburetor have been modified in production beginning on January 19, 1982. Six
(6) holes have been added to the needle valve seat (See Figure 1) and a sleeve has been added to the choke chamber. The needle valve and seat screws
into the choke chamber and the six (6) holes in the valve seat are surrounded by the sleeve.

When the needle valve drops, fuel pressure forces fuel through the six (6) holes in the valve seat. The fuel stream then flows down the sleeve into the
float bowl.

Table 1 lists new part numbers for the above modification.

Modified Carburetor Needle Valve|Page 715 > < Modified Carburetor Needle Valve|Page 709