subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Speed Alarm - Production Modification|Page 3433 > < Speed Alarm - Production Modification|Page 3431
Page 1
background image

Instrument Cluster / Carrier: Technical Service Bulletins
Digital Dash - Removal & Replacement Procedure

NUMBER   

08-24-87

DATE

8-3-87

APPLICABILITY 1985 TO '87 XT MODELS EQUIPPED WITH A DIGITAL DASH

SULJECT:

DIGITAL DASH REMOVAL AND REPLACEMENT

Should it be necessary to remove an XT digital dash unit, follow this procedure for removing and installing the unit.

Step 1) Remove the lower panel

Step 2) Remove the heater crossover duct

FIGURE 1

Step 3) Remove the mounting screws on the lower cover assembly. See Figure 1.
Step 4)

Disconnect the instrument panel wiring connectors located
next to the left hand kick panel.

Step 5)

Disconnect the speedometer cable.

Step 6)

Lower the steering column to the lowest tilt position.

Speed Alarm - Production Modification|Page 3433 > < Speed Alarm - Production Modification|Page 3431