Aerio L4-2.0L (2002)
Cruise Control Switch: Testing and Inspection
Coast/Set, Resume/Accel and Cancel Switches
Inspection
Check for resistance between "SW" and "GND" terminals of disconnected switch connector (1) under each condition as follows.
If check result is not satisfactory, replace combination switch assembly.
COAST/SET, RESUME/ACCEL and CANCEL switches specification
All switches released (OFF): Infinity
CANCEL switch pressed (ON): About 0 Ohm
COAST/SET switch rotated (ON): 200 - 240 Ohm
RESUME/ACCEL switch rotated (ON): 820 - 1000 Ohm
