Aerio L4-2.3L (2006)
3) Install suspension frame and tighten suspension frame bolts to specified torque.
Tightening torque
Suspension frame bolts (a): 90 Nm (9.0 kgf-cm, 65.0 ft. lbs.)
4) Install control rods and tighten bolt and nuts by hand.
5) Install stabilizer bar and tighten bolts and nuts by hand.
6) Install muffler.
7) Install wheels and tighten wheel nuts to specified torque.
8) Lower hoist and tighten control rod bolts and nuts to specified torque.
9) Check rear toe and adjust it as necessary. For check and adjustment procedures, refer to Rear Wheel Alignment Inspection and Adjustment.
