Aerio L4-2.3L (2006)
2. Install secondary return spring and secondary piston (1) into cylinder body (4).
NOTE: For vehicles equipped with ABS, align oblong hole in secondary piston (2) with stopper pin hole (3) in master cylinder body (4) when
installing it.
3. Install primary piston assembly into cylinder body.
4. Install piston stopper bolt (1) or stopper pin (2) with pistons pushed in all the way and tighten or install it.
Tightening torque
Piston stopper bolt (a): 10 Nm (1.0 kgf-m, 7.5 ft. lbs.)
5. Install circlip (1).