Aerio L4-2.3L (2006)
Using a dial gauge, measure runout at center journal. Rotate crankshaft slowly. If runout exceeds its limit, replace crankshaft.
Limit on runout 0.06 mm (0.0023 inch)
Crankshaft thrust play
Measure this play with crankshaft set in cylinder block in the normal manner, that is, with thrust bearing and lower crankcase installed. Tighten
crankcase bolts. Use a dial gauge to read displacement in axial (thrust) direction of crankshaft. If its limit is exceeded, replace thrust bearing with
new standard one or oversize one to obtain standard thrust play.
Crankshaft Thrust Play
Standard: 0.10 - 0.35 mm (0.0039 - 0.0138 inch)
Limit: 0.42 mm (0.0149 inch)
