Aerio L4-2.3L (2006)
Thickness of crankshaft thrust bearing
Standard: 2.500 mm (0.984 inch)
Oversize: 0.125 mm (0.0049 inch): 2.563 mm (0.1009 inch)
Out-of-round and taper (uneven wear) of journals
An unevenly worn crankshaft journal shows up as a difference in diameter at a cross section or along its length (or both). This difference, if any, is
determined by taking micrometer readings. If any one of journals is badly damaged or if amount of uneven wear in the sense exceeds its limit, regrind
or replace crankshaft.
Limit on out-of-round and taper: 0.01 mm (0.0004 inch)
Out-of-round: "A" - "B"
Taper: "a" - "b"
Main Bearings
Main bearings general information
^
Service main bearings are available in standard size and 0.25 mm (0.0098 inch) undersize, and standard size has 5 kinds of bearings differing in
tolerance.