Aerio L4-2.3L (2006)
Part 2 Of 2
Timing Chain Cover Removal and Installation
Removal
1) Remove engine assembly from vehicle.
2) Remove oil pan and oil pump strainer.
3) Remove cylinder head cover.
4) Remove crankshaft pulley bolt.
To lock crankshaft pulley (1), use special tool (camshaft pulley holder) with it as shown in figure.
Special Tool
(A): 09917-68221
NOTE: Be sure to use the bolts instead of pins for fixing special tool to crankshaft pulley.
Bolt size: M8, P 1.25 L = 25 mm (0.98 inch)
Strength: 7T
