Aerio L4-2.3L (2006)
Control Module HVAC: Service and Repair
HVAC Control Module Removal and Installation
Removal
1. Disconnect negative (-) cable at battery.
2. Gently remove instrument panel center garnish trims (1) from instrument panel.
NOTE: Be careful not to damage instrument panel center garnish trims.
3. Remove screws (1).
4. Tilt instrument panel center garnish (2) and pull it through instrument panel.
5. Disconnect electrical connectors from HVAC control module, audio system and hazard switch.
6. Remove instrument panel center garnish.