Aerio L4-2.3L (2006)
2) Install wheel hub (1) and new spindle nut.
3) Tighten spindle nut (2) to specified torque.
NOTE: Removed spindle nut should be replaced with new one.
Tightening torque
Spindle nut (a): 175 Nm (17.5 kgf-cm, 126.5 ft. lbs.)
4) Caulk spindle nut (1) as shown.
5) Install new spindle cap.
NOTE: When installing spindle cap, hammer lightly several locations on the collar of cap until collar comes closely into contact with wheel hub.
6) Install brake drum and wheel.
