Aerio L4-2.3L (2006)
Wheel Fastener: Service and Repair
Rear
Wheel Hub, Wheel Bearing and Wheel Stud Removal and Installation
Removal
1) Remove rear brake drum.
2) Remove spindle cap (1) as shown (by hammering lightly at 3 locations around it so as not to deform or cause damage to seating part of cap).
3) Uncaulk spindle nut and remove spindle nut (2).
4) Pull wheel hub (1) off by using special tools.
Special Tool
(A): 09943-17912
(B): 09942-15511
5) Remove wheel sensor ring (if equipped with ABS).
6) Remove hub bolts.
Installation
1) Install hub bolts.