Aerio L4-2.3L (2006)
On-vehicle balancing methods vary with equipment and tool manufacturers. Be sure to follow each manufacturer's instructions during balancing
operation.
WARNING: Wheel spin should be limited to 35 mph (55 km/inch) as indicated on speedometer. This limit is necessary because speedometer
only indicates one-half of actual wheel speed when one drive wheel is spinning and the other drive wheel is stopped. Unless care is taken in
limiting drive wheel spin, spinning wheel can reach excessive speeds. This can result in possible tire disintegration or differential failure,
which could cause serious personal injury or extensive vehicle damage.
CAUTION: For vehicle equipped with ABS, using on-vehicle balancing method with ignition switch ON may set malfunction diagnostic trouble
code (DTC) of ABS even when system is in good condition.
Never turn ignition switch ON while spinning wheel.
